Kirin 990 benchmarks: SoC of the Mate 30 Pro mainly offers more GPU performance

Kirin 990 Benchmarks: SoC des Mate 30 Pro bietet vor allem mehr GPU-Leistung

Kirin 990 benchmarks: SoC of the Mate 30 Pro mainly offers more GPU performance

Huawei and the HiSilicon chip developers belonging to the group have a 7 nm SoC in their range with the Kirin 990, which is only available in Germany in comparatively small numbers with the Mate 30 Pro. Benchmarks attest to the processor’s higher GPU performance than its predecessor.

HiSilicon’s Kirin 990 is available in two versions: the Kirin 990 tested here with an integrated LTE modem, which is produced by TSMC using the N7 process, and the Kirin 990 5G with Balong 5000 modem from modern N7 + production. In the 5G version, the chip also has a slightly higher clock rate for two of the four Cortex-A76 and for the Cortex-A55. The following table shows the current SoCs from Qualcomm, Samsung and HiSilicon.

Kirin 990 is available in the Mate 30 Pro

The Kirin 990 (5G) had its premiere last year in the Huawei Mate 30 and Mate 30 Pro. Due to the lack of Google services, the smartphone was initially sold in Germany, after a first test sale in November in Spain, the smartphone finally made it to Germany in December. Instead of Google Mobile Services (GMS), the Huawei Mobile Servies (HMS) with its own AppGallery are preinstalled as a store for Android apps.

CPU relies on well-known architecture

The rather moderate increase in CPU clock rates compared to the Kirin 980 when the 7 nm production was adopted for higher, but not blatantly better measurement results in the CPU benchmarks. Two of the Cortex-A76 have got 260 MHz more clock, the other two Cortex-A76 have a plus of 170 MHz. The four Cortex-A55 are 60 MHz more than the Kirin 980. In the Kirin 990 5G, HiSilicon deploys larger guns with 260 MHz, 440 MHz and 150 MHz. The higher clock speeds are also possible thanks to TSMC’s N7 + production including EUV lithography.

Mali-G76 MP16 is wider and clocks lower

The differences to the Kirin 980 in GPU performance are clearer. Because where the CPU uses a well-known design with only higher clock rates, the GPU uses 60 percent more computing units. The Mali-G76 MP10 has replaced HiSilicon with the much wider Mali-G76 MP16 and has reduced the maximum clock from 720 MHz to 600 MHz in order to maintain efficiency.

In GFXBench using the Vulkan API, the performance of the Mali-G76 MP16 is over 30 percent higher than with the Mali-G76 MP10, with OpenGL ES 3.1 it is up to 23 percent, with OpenGL ES 3.0 32 percent and when using the older OpenGL ES 2.0 still 15 percent. The distances are larger in 3DMark.

Mate 30 Pro fluctuates under constant load

The Kirin 990 loses the direct comparison with the latest models from Qualcomm and Apple, however, the SoC also weakens with continuously retrieved performance – at least installed in the Mate 30 Pro. Here, under constant load, there are significant fluctuations in performance from the 7th round, which cannot be determined by the competition.

The next smartphone expected with HiSilicon Kirin 990 is the P40 Pro, which will be presented in Paris at the end of March and is said to have a total of seven cameras.

This article was interesting, helpful, or both? The editors appreciate any support in the form of deactivated ad blockers or a subscription to ComputerBase Pro. More on the topic of advertisements on ComputerBase.

Leave a Reply

Your email address will not be published. Required fields are marked *

Moto G8 Power im Hands-On: Motorolas Akkumonster hat jetzt vier Kameras und Full HD

Moto G8 Power in hands-on: Motorola’s battery monster now has four cameras and Full HD


[] Topaz Studio Full Download Crack v.